IndustriesRail & Transport Infrastructure

Rail & Transport Infrastructure

Rail & Infrastructure — Monitoring movement, condition and change.

Railway infrastructure is long, exposed and shared with moving trains. Small changes in track geometry or surrounding structures can matter, and access to measure them is tightly controlled.

AxioIX’s work in rail centres on a proposed sensor family for monitoring track and infrastructure movement, built on an existing wireless technology foundation.

Discuss a Rail Application
See Track Geometry
Railway track and infrastructure

Track geometry

Monitoring the geometry that matters.

Typical monitoring requirements include cant and cross-level, the height difference between the two rails, and twist, the change in cross-level over a length of track. Movement of embankments, structures and other infrastructure can affect both.

Detecting gradual change between inspections can help infrastructure managers decide where closer examination is needed.

Conceptual track geometry: cant or cross-level as the height difference between rails, and twist as the change in cross-level between two points along the track. Not to scale.CONCEPTUAL · TRACK GEOMETRYCross-sectioncant / cross-levelheight difference between the two railsAlong the trackABtwist: change in cross-level between A and BNot to scale; no tolerances implied

Deployment practicality

Practicality matters as much as accuracy.

In rail, a sensor that measures well but takes too long to fit, needs frequent attention or is difficult to commission will not be practical. Track access is limited, so every minute on site counts.

Mounting
Secure fixing without compromising the infrastructure.
Installation time
Fitting within short access windows.
Size
Compact enough to avoid interference with railway operations.
Commissioning
Straightforward set-up and confirmation of operation.
Field maintenance
Minimal attention over a long service life.

Operating conditions

A demanding environment for electronics.

Railway equipment experiences temperature extremes, vibration and shock from passing trains, and installation in constrained sites, cuttings and tunnels where communications can be difficult.

  • Temperature extremes and weather
  • Vibration and shock from train movements
  • Constrained sites and tunnels
  • Intermittent or difficult communications

Distributed monitoring

Power, communications and reliable evidence.

Monitoring points may be spread over long distances. Appropriate power management, communications and reliable evidence collection are central design considerations, along with how information reaches the people who maintain the infrastructure.

Explore rfFlux
Power management
Long unattended operation between maintenance visits.
Communications
Suited to remote and obstructed locations, including tunnels.
Evidence collection
Holding measurements reliably until they can be delivered.
Information flow
Reaching the teams responsible for the infrastructure.

Development proposal

A focused first application, a reusable foundation.

The proposed rail sensor family starts with a narrow, well-defined first application. Building on an existing wireless technology foundation lets that first phase concentrate on rail-specific measurement, installation, power and communications questions.

Once proven, the same foundation could support other rail monitoring requirements without starting again.

OEM Embedded Intelligence

First application
A clearly bounded track monitoring requirement.
Shared foundation
Reusable sensing and communications building blocks.
Further variants
Other monitoring needs addressed on the same foundation.
Four distinct stages from controlled proof to field evaluation, product qualification and operational deployment, each requiring its own evidenceFROM PROOF TO DEPLOYMENTControlled proofdoes the measurement work in principle?1Field evaluationdoes it work in the railway environment?2Product qualificationdoes it meet the required approvals?3Operational deploymentis it supported in routine use?4Each stage needs its own evidence; one does not imply the next

Engineering validation

Proof, evaluation, qualification and deployment are different.

Rail requires clear distinctions between a controlled proof of the measurement, evaluation in the field, formal product qualification and approval, and routine operational deployment.

The rail sensor family is a development proposal. It has not completed field validation or operational qualification, and no accuracy or approval claims are made here.

Discuss a rail or infrastructure application.

Talk to AxioIX about track, structure or infrastructure monitoring requirements.

Discuss a Rail Application
Back to Industries